The operator must inspect and clean the machine, do the daily maintenance work, and achieve the neat, clean, lubrication and safety.

Keep a machine look neat, clean and free of grease, rust, yellow. Maintain complete and clean machine parts and accessories.

Two keep the working place of the machine tool, and the pedal is clean and tidy. To maintain the guide rail surface and the sliding surface cleaning, lubrication; check the guide rail surface, working table and sliding surface with no damage.

Three to maintain a sufficient amount of oil lubrication system, oil flow, oil standard (window) eye-catching, clean and complete lubrication equipment. Check the oil storage area, lubricating parts and pipelines (including cooling system pipeline) with no leakage.

Four to maintain electrical, limited and interlocking device safety, reliability.

Five in accordance with the provisions of the timely maintenance of equipment, and make a record. On time to complete the record monthly.

Six without permission not allowed to change (system) equipment (including the Ministry of annex).

Seven former should inspect the tool machine rotating parts is normal, protection device is complete, working face whether multi residue, and the parts of the lubrication oil. Confirm no problem before operation.

Eight thread roller must be the installation of sound, adjustment and replacement of the roller must stop and machine operation shall not be used in military extends into the bed surface adjustment or touch the swab machine

Nine is not allowed to drive the elastic adjusting screws, tighten the nut after adjustment can work.

Ten the operator must focus on the energy, the hand must leave the rolling operation part, in order to prevent the